技术支持
技术支持
当前位置:首页 - - 技术支持
北欧NT燃烧、阻燃、防火测试标准

 

北欧NT燃烧、阻燃、防火测试标准
NT FIRE 001
:建筑材料不燃性测试(ISO1182)

NT FIRE 001Building materials,non-combustibility

 

NT FIRE 002:建筑产品引燃性测试

NT FIRE 002Building products,ignitability

A test such as is specified in thismethod deals only with a simple presentation of a particular aspect of the potentialfire situation typified by a radiative and convective heat exposure to theproduct, and cannot alone provide any direct guidance on behaviour or safety infire. A test of

this type may, however, be used forcomparative purpose or to ensure the existence of a certain quality ofperformance considered to have a bearing on the fire performance generally, inthis case ignitability.

 

NT FIRE 003:覆盖材料防火能力测试

NT FIRE 003Coverings, fire protectionability

This test method is identical withthe standard INSTA 411.

This method specifies a procedure todetermine the ability of a covering to protect underlying combustible materials  against ignition during a specified fireexposure.

 

 

 

NT FIRE 004:建筑产品释热性与生烟性测试

NT FIRE 004Building products, heatrelease, smoke generation

The product can be classified according to BoverketsAllmänna råd 1993:2 Utgåva 2 after testing. The classes are surface layer classI, II or III, where class I is the best class.

The testreport can be used as the basis for an application of type approval and anagreement with SP of production control.

The test method measures a surface products ability to produce heat andsmoke during a room fire.

Examples of products that can be tested with this method

Gypsumwallboards, particleboards, wall paper, paint systems, insulation boards with surface materials.

 

NTFIRE 005:建筑物构件防火性测试(ISO834)

NT FIRE 005Elements of buildingconstruction

 

NT FIRE 006:屋顶火焰传播性能测试

NT FIRE 006Roofings, fire spread

This NORDTEST method is identical with the standard

INSTA 413.

This test method specifies aprocedure to determine the

tendency of a roofing to spreadfire.

The test methoddescribed is intended for roofings. The test method measures a roofcoverings ability to withstand flame spread when exposed to a burning woodcrib.

 

 

NT FIRE 007:地板火焰传播和生烟性测试

NT FIRE 007Floorings, fire spread, smokegeneration

Thetest method measures floorings ability to withstand flame spread and the smokeproduction when exposed to a burning wood crib.

Examples of products that can betested with this method

Alltypes of flooring, for example wood, plastic and textile flooring. The flooringshall be mounted on the substrates on which it is intended to be used on. Ifthe flooring material is to be used on different substrates, all combinationsmust be covered by testing.

 

NTFIRE 008:门窗及其配件防火测试(ISO3008)

NT FIRE 008Door and shutterassemblies

 

NT FIRE 009:上釉元件防火性测试(ISO3009)

NT FIRE 009Glazed elements, fireresistance

 

NT FIRE 010:挡火墙,阻止火焰传播的效率

NT FIRE 010Fire dampersEfficiencyto prevent fire spread

This NORDTEST method specifies a testmethod to determine the

efficiency of fire dampers to prevent firefrom spreading through

ventilation ducts.

The test method described is intended forfire dampers which

automatically close due to excessive heatby means of a releasing

mechanism.

 

NT FIRE 011:气态烟尘爆炸极限测试

NT FIRE 011Dust clouds, minimumexplosible dust concentration

 

NT FIRE 012:固体材料的生烟性测试——比光密度(ASTME 662)

NT FIRE 012Solid materials, smoke

 

NT FIRE 013:塑料燃烧性测试——氧指数法(ISO4589)

NT FIRE 013Plastics, oxygen index

 

NT FIRE 014:装饰家具引燃性测试(BS5852)

NT FIRE 014Upholstered furniture,ignitability

 

NT FIRE 015:纺织物和薄膜燃烧性能测试——垂直试样

NT FIRE 015Textiles and films,vertical

This report describes a summary ofregulations and test methods which can be applicable

for technical textiles when used inbuildings. An overview and analysis is made for test

methods and it can be seen they canbe divided in small-scale tests, intermediate scale

tests and even large scale tests.

The report contains also the resultsof a questionnaire inside the Contex-T consortium

indicating the level of therequirements which will be used in different EU countries. It

was difficult to get data from allcountries but we obtained as much as possible.

 

 

NT FIRE 017:

This Nordtest method specifies aclassification system and

a test procedure for determining thefire resistance of filing

cabinets, data cabinets and diskettecabinets.

The classification system and thetest method described are

intended for filing cabinets, datacabinets and diskette cabinets.

 

NT FIRE 018:铺地纺织物阻燃性测试方法——片剂法(ISO6925)

NT FIRE 018Textile floor coverings,tablet test

 

NT FIRE 019 :多层纺织物阻燃性测试方法——片剂法

NT FIRE 019 Multilayer textiles, Burningbehaviour-tablet test

This method can be used to determinethe early burning properties

of multilayer textile products likesleeping bags and quilts. The

method is not applicable to multilayertextile products used in a

vertical position, such as clothing.

This method is suitable for thedetermination of the burning behaviour

of sleeping bags, quilts, and othersimilar multilayer

textile products. A burningmethenamine tablet is used as ignition

source.

 

NT FIRE 021:钢结构绝缘材料防火性

NT FIRE 021Insulation of steel structures:Fire protection

The test- and calculation methoddescribed is intended for

insulation systems applicable tosteel beams and columns.

The insulation may be intumescentpaint, mineral wool slabs,

sprayed mineral wool, vermiculite orcalcium silicate slabs,

reinforced gypsum slabs etc.Composite insulation, in which

the individual layers break down,may require the thermal

resistance for each number of layersto be calculated instead

of the thermal conductivity of theinsulating material.

The calculation method is notimmediately applicable to

- very dense materials, whichprotect by heat absorption

rather than by insulation, e.g.concrete

- combustible materials or materialswhich break down at a

certain rate independent of theinsulation temperature, e.g.

wood cladding and gypsum slabs.

 

NT FIRE 022:塑料和纺织品可燃性测试方法(BS2782)

NT FIRE 022Plastics and textiles,flammability

Plastics and rubber technology, Plastics, Polymers, Moulding(process), Injection moulding, Extruding, Tensile testing, Test specimens,Reports

 

 

NT FIRE 025:建筑材料表面覆盖产品大型室内火实验

NT FIRE 025Surface layer, buildingcoverings and components

NT-FIRE 025 (2), a method similar toroom tests suggested by ASTM and ISO. Since many small scale methods arebelieved to model different stages of fire, it was determined to measure theemission of fire effluents from three small-scale methods using the samematerials as in the full scale fire test.

 

 

NT FIRE 027:纺织品引燃性测试——垂直测试(IS()6940)

NT FIRE 027Textile fabrics, ignition,vertical

 

NT FIRE 028:纺织品火焰传播测试——垂直测试(IS()6941)

NT FIRE 028Textile fabrics, flamespread, vertical

 

NT FIRE 029:纺织品引燃性和火焰传播测试

NT FIRE 029Textile fabrics, ignition,flame spread

The method should be used solely toassess the properties of materials

or systems in response to heat andflame under controlled

conditions. Results may not apply tosituations where there is

restricted air supply or prolongedexposure to large sources of

intense heat as in a conflagration.

Owing to its 45° angle specimenorientation, this NORDTEST method

is applicable if the methods usingvertical specimen orientation

are considered to be too severe orin other ways unsuitable.

 

NT FIRE 030:建筑产品火传播和生烟性大型测试

NT FIRE 030Building products: Fire spreadand smoke production - full scale test

 

NT FIRE 032:装饰家具大型燃烧测试

NT FIRE 032Upholstered furniture: Burningbehaviour - full scale test

This method is intended to be usedfor the evaluation

of fire behaviour of upholsteredfurniture in full scale. The

specimen is ignited by a specifiedignition source and burns

freely under well ventilatedconditions.

 

NT FIRE 033:建筑产品的引燃性测试(ISO5657)

NT FIRE 033Building products,ignitability

 

NT FIRE 034:通风管道防火性测试

NT FIRE 034Ventilation ducts, fireresistance

 

NT FIRE 035:建筑产品——松散装填热绝缘材料的抗可燃性和抗阴燃性测试

NT FIRE 035Building products: Flammabilityand smouldering resistance of loose-fill thermal insulation

 

NT FIRE 036:管道绝缘材料的火焰传播和生烟性大型测试

NT FIRE 036Pipe insulation: Fire spread andsmoke production – Full scale test

This method is intended for circular pipe insulation to be appliedon water pipes.but is not evaluate the fire resistance of a product.

 

NT FIRE 037:寝具燃烧性能测试(BS6807)

NT FIRE 037Bedding components, Ignitability

The method is intended for testingof blankets, quilts, pillows

and mattresses, including thin,light mattresses used on top of

other mattresses. This NORDTESTmethod specifies a procedure to determine

the ignitability of beddingcomponents with small smouldering

and flaming sources of ignition.

 

 

NT FIRE 038:建筑材料可燃物含量测试

NT FIRE 038Building material,combustible content

 

The test method described isprimarily intended for insulating

building products made of glass,rock or slag fibre.

The test method is a simpledetermination of the organic

content and mainly intended forquality control purposes of

fire classified products.

The test method is applicable forhomogeneous products

and products made of distinct andseparable layers of

homogeneous materials.


友情链接:深圳市赛迪菲科科技有限公司 | 深圳市西思特科技有限公司 | 深圳市西思特科技有限公司
版权所有:深圳市西思特科技有限公司 Copyright © 2010-2012 www.cestr.com.cn All Rights Reserved. Power by DedeCms